Cornerstone Temecula Concrete WorksCornerstone Temecula Concrete Works

Stamped concrete services in Temecula CA - a patterned slab with the joints hidden

Plain gray patio, or a stamped one gone faded and cracked? We pour, color, stamp and seal a new slab, explained before we start.

Wood-look stamped concrete patio beside a wood-paneled home, with broad steps and glass doors.
  • Licensed and fully insured.
  • Free quotes on site.
  • We reply within 1 business day.

What is stamped concrete, and is it right for your patio?

Stamped concrete services in Temecula, CA give you a poured patio, entry or walk that's colored, pressed with rubber mats while it's still soft so it looks like stone, brick, wood or tile, and then sealed.

Most people call us with a plain slab they're tired of, or an old stamped patio that's faded, chipped or cracked right through the pattern. The price moves with the size of the area, whether old concrete has to come out first, the pattern, how the color goes in and the steel under it, and the schedule turns mostly on the prep work, any permit and the curing wait before we can seal. I'll give you a written figure for your own slab once I've seen it.

How can you tell your stamped concrete needs attention?

  • Water soaks in now

    If sprinkler water darkens the slab instead of beading up, or the color looks flat and chalky, the sealer has worn thin. A reseal usually brings it back, and waiting lets dirt and stains soak into bare concrete.

  • Cracks cutting across the pattern

    A crack that wanders through the stone shapes usually means the joints weren't laid out with the pattern, or the base under it moved. Left alone, water gets in and the edges start to chip, so it's worth having us look before it spreads.

  • Gray showing through chips

    When a chipped corner shows plain gray, the color was only on the surface, so every new knock is going to show. That's a good reason to think about how the color goes in on the next slab, which we go over at the estimate.

How we build stamped concrete, from the base up

Before anything else, we talk about how the color goes in, because that decides what a chip looks like years from now. Then we dig out and pack the subgrade, the dirt the slab sits on, and the base above it, because a slab that settles takes the pattern down with it. We set forms, lay rebar, the steel that holds the slab together if it cracks, pour, add the color and press the rubber mats in while the concrete is still soft. We cut the control joints, the planned cuts that give cracks a place to go, along the lines of the pattern so they read as grout lines and not scars. Once it's cured, meaning it's had its wait to gain strength, we seal it, and before that coat goes on I'll ask whether you want grip mixed in, since a fresh seal can get slick when it's wet. If the budget gets tight, I'd rather go with a simpler pattern than skimp on the base, because nobody sees the base on day one but everyone sees it when a corner sinks.

A stamped patio often ties into the work around it. If the walk out front is cracked or lifting, we can pour a new concrete sidewalk to meet the stamped entry, and when the garage slab is in rough shape, we redo the garage floor concrete as a plain, hard-wearing slab, because a garage floor needs to be flat and easy to clean more than it needs a pattern.

  • Integral color, mixed through the slab

    The color goes into the mix, so a chip or a saw cut shows the same color as the top and the slab ages evenly. It suits most patios and walks, though you give up the deepest, brightest tones.

  • Color worked into the surface

    The color is spread onto the fresh concrete before stamping, which gets you richer, brighter tones than color in the mix. The trade-off is that a deep chip shows gray underneath, so it suits spots that don't take hard knocks.

Get a written estimate for your stamped concrete

Send the form and we'll reply within one business day to set a time for me to come out. The estimate is free, done on site and written out, with no obligation.

(951) 466-2622
Based in
Temecula, CA 92592
Hours
Mon–Sun: 6 AM–11 PM

What happens after you call about a stamped patio in Temecula?

From your first call to the last walk-through, you deal with me and our own crew, and here's what each step looks like.

  1. Call or send the form

    Call (951) 466-2622 or send the form, and we'll set a time for me to come out. It helps to have a rough idea of the size and a pattern or two you like.

  2. Walk the site with me

    I look at the area with you, measure it and show you on the ground where the edges and joints would go. Then you get a written estimate, so you know what you're paying for before you decide.

  3. We build, seal and review

    Once you say go, we handle any permit and inspections the job needs, and our crew forms, pours, stamps and seals the slab. At the end I go over the finished job with you.

Why Temecula homeowners call Cornerstone Temecula Concrete Works for stamped work

  • I come out and estimate myself

    I look at every job in person and give the estimate, and our own crew does the forming, pouring and finishing. The person who shows you where the joints go is the one whose crew cuts them.

  • Pouring and finishing since 2013

    Before I opened this business in 2013, I spent years patching other people's failed walks and slabs for a property management company. Most of what I fixed went wrong over something nobody explained, so I explain the job before we start.

  • Licensed and fully insured

    We're licensed and fully insured. California's state license board requires a license when a job needs a building permit, uses any extra workers or runs $1,000 or more in labor and materials, so ask any contractor you're comparing whether they hold one.

When you're ready to look at your own slab, ask for an estimate or call (951) 466-2622, and I'll walk it with you.

Stamped patios, walks and driveways in Temecula

For a patio, the city of Temecula says building permits aren't required for slabs on grade, but setback requirements still apply, so we check where the slab sits against your lot lines before we set a single form. A driveway can be different at the street, because the city lists driveway approaches among the minor improvements that may need an encroachment permit. When a job needs a permit, we work out which city or county office it goes through, pull it and set up the inspections, and we tell you what falls on your side as the owner.

Most stamped calls we get here are backyard patios and front entries, and owners often want the walk and the driveway border to match, so we plan the pattern across all of it at the estimate. We get the same calls on jobs in Murrieta and Menifee.

Questions about stamped concrete in Temecula

How much does a stamped concrete patio cost in Temecula?

A stamped concrete patio in Riverside, California usually costs about $9 to $18 per square foot, and that's the going range for the area, not our price. In those figures, reinforced patios run higher than ones without steel, and your own number turns on size, pattern, color and prep. I'll give you a written figure after I see your yard.

How often should stamped concrete be resealed?

Reseal it as needed, not on a set number of years. Plan for it when water or spills stop beading up on the surface, or when the color starts to look flat instead of deep.

How do I keep stamped concrete from being slippery when wet?

Have a traction additive mixed into the final coat of sealer, because a freshly sealed stamped slab can be slick when it's wet. It has to go in on sealing day, which is why I ask you about it before we seal.

What causes a cloudy or blotchy finish on stamped concrete?

Usually it's the sealer, put on too heavy or too early. Most stamped concrete gets a topical film-forming sealer, a coat that sits on top and deepens the color, and too much of it or the wrong timing is what leaves those marks.

Does stamped concrete crack like regular concrete?

Yes, it cracks for the same reasons any slab does, so it needs control joints to guide where the cracks go. A good layout hides those joints inside the pattern, and that's worth settling at the design stage, before anyone pours.

How do I make sure a stamped patio is built on a good base?

Ask how the base will be prepared before any color goes on. A stamped slab still needs a compacted base, the right thickness for its use and reinforcement sized to the job, and I'll walk you through that part of the plan at the estimate.

  • When your front walk is cracked or lifting next to a new stamped entry, a fresh walk poured to the same lines ties the whole approach together.

  • If your garage slab has sunk, pitted or cracked across the middle, a new floor poured and finished for parking and storage fixes it while we're on site.

Service areas for stamped concrete around Temecula

Cornerstone Temecula Concrete Works is based in Temecula, CA, and the 12 service areas below include Murrieta and Wildomar. If you don't see your city listed, call and ask.

Temecula, CA

Book a look at your stamped patio

Have the project type, rough square footage and a pattern you like in mind when you call (951) 466-2622 or send the form, and we can plan the visit around it.